I thought I would take you through the steps of making a Fused Glass Plate. I will be making a Fused Glass Plate that is 12″ by 12″ and I will be slumping it into a Slumper Mold.
This first step I cut a piece of 96 Clear glass 12″ by 2″ and added stringers every 1/4.” I fused the stringers to the clear glass. I made the clear glass a little larger than I wanted for the Fused Glass Plate, so I could cut the edges off and make a nice clean edge. I want the clear strip to be 1 1/2″ wide.
Step #2 will be next time. Unfortunately, this will be going backwards, but I’m sure you will be able to figure it out 🙂
Christine — Glass Artist
Click here to see more of my Fused Glass Art: www.mastersglassart.com